Our Product

2
Yes
None
1
1000000
Name...
/products/
Thumbnail

Categories:

Cementitious waterproofing
PENETRON
PENETRON Image

SHORT DESCRIPTION & APPLICATIONS

Cementitious, concrete surface applied (slurry application) or for filling cavities (pourable application), crystal growth waterproofing mortar. Indicative mixing: For surface application, 1 bag is mixed in 12–13 Lt water, but the mixing of half bag with 6-6.5 Lt water is recommended. For spraying application, increase the mixing water to 14-15 Lt/bag. For pourable application, mix with 15-18 Lt water/bag depending the required workability.

CONSUMPTION INFORMATION

Indicatively, the consumption in concrete surface application is 1,4-1,6 Kg/m2 in total 2 coats or 1 bag for approx. 14-16 m2 . In pourable application, consider a consumption of 1,2-1,3 Kg of product for filling 1 Lt void.

CODIFICATION PACKAGING COLOR PACKAGING INFO PALLET
10.00001 Bag 22.68 Kg Grey 48 Bags / Pallet 1.088,64 Kg
10.30000 Pail 5 Kg Grey 132 Bags / Pallet 660 Kg



PENETRON INJECT (Α+Β)
PENETRON INJECT (Α+Β) Image

SHORT DESCRIPTION & APPLICATIONS

New technology, two component integral crystalline waterproofing crack-injection-system. Application by cement-injection-pump. Suitable for permanent waterproofing and repairing concrete cracks in basements, tunnels, tanks, pools, bridges, sewage tanks, canals, construction joints etc. Mixing: In 9 or 10 Lt water add 2 or 1 Lt liquid FL (component B) and afterwards the powder P-25 Kg (component Α) for respectively ~2 hours or up to 1 hour workability.

CONSUMPTION INFORMATION

The two mixing ratio respectively define large or small workability. Thus, 2 Lt liquid FL pail, can be used for 2 packages of 25 Kg powder P. For enhancing the fluidity we can add 0,5–1 Lt extra water. Thus, we achieve the sealing of even smaller cracks. Indicatively, each set seals 20 – 22 Lt of voids.

 

CODIFICATION PACKAGING COLOR PACKAGING INFO PALLET
10.21001 Pail 25 Kg Grey 33 sets of Pails / Pallet ~ 900 Kg
10.21002 Pail 2 Lt Off Yellow 33 sets of Pails / Pallet ~ 900 Kg




PENETRON ADMIX
PENETRON ADMIX Image

SHORT DESCRIPTION & APPLICATIONS

Crystal growth, cementitious powder, waterproofing system added to concrete as an admixture. The product can be used in the ready mix plant with the form of powder directly added in the pre-weighted dry parts of concrete (in the lift-band) before the water addition or by addition in the mix truck, at the job site, right after the mixing (with electric mixer) with water – in the special mixing pails with measure. Mixing water ratio: mix well ½ of 18 Kg bag in 11.5 Lt water. The small packaging of 3.75 Kg pail is convenient for the production of waterproofed mortars or small quantity of concrete in a small mixer. Mixing time in the mix truck or small mixer is at least 5 min.

CONSUMPTION INFORMATION

The recommended PENETRON ADMIX® ratio for permanently waterproofed concrete is 0.8-1% by weight of cement. For regular concrete ~300 Kg cement, we use 3 Kg product powder per m3 of concrete. E.g. for 9 m3 mix truck we use: 3 Kg x 9 = 27 Kg, that is 1½ PENETRON ADMIX® bag. It is easier to cut in half the bags, then mix 3 half bags in 3 mixing pails with 11.5 Lt water each. For the production of waterproofed mortars (cement content >250 Kg/m3), the mixing of 0.5-1.0 Kg PENETRON ADMIX® per 50 Kg of cement is recommended.

CODIFICATION PACKAGING COLOR PACKAGING INFO PALLET
10.30003 Pail 3.75 Kg Grey 132 Pails / Pallet 495 Kg
10.00004 Bag 18 Kg Grey 48 Bags / Pallett 864 Kg



PENETRON ADMIX SOLUBLE BAGS
PENETRON ADMIX SOLUBLE BAGS Image

SHORT DESCRIPTION & APPLICATIONS

Crystal growth, cementitious powder, waterproofing system added to concrete as an admixture. Same technology as the above existing packaging of PENETRON ADMIX®, but with the ability, due to its water soluble packaging, of adding it directly to the mix truck (without previous mixing with water). Also, it contains a special traceable coloring (green) indicator for the right dosage laboratory control.

CONSUMPTION INFORMATION

Based on the indicative ratio of 0.8-1% by weight of cement, we add, one by one the water soluble bags, in the mix truck, same quantity as the total m3 of concrete of the mix truck. Attention: mix in the mix truck in high speed for at least 5 – 10 min, after the addition of the last package of the soluble bag.

CODIFICATION PACKAGING COLOR PACKAGING INFO PALLET
10.00016 Water Soluble Bag 3 Kg Grey 6 Bags / Pail=18Kg 33 Pails / 594Kg



PENECRETE MORTAR
PENECRETE MORTAR Image

SHORT DESCRIPTION & APPLICATIONS

Crystal growth, cementitious waterproofing and repairing mortar. Supports all PENETRON® waterproofing systems. Mixing: indicatively for approx. 1 bag 4 Lt of water are required. The mixing of small quantities to a trowelable mortar consistency is recommended.

CONSUMPTION INFORMATION

For fillings, the indicative consumption is approx. 2 Kg/Lt or 11 Lt per 22.68 Kg bag. For construction joints or cracks repair, the indicative consumption is 1.3-1.5 Kg/linear meter.

CODIFICATION PACKAGING COLOR PACKAGING INFO PALLET
10.00002 Bag 22.68 Kg Grey 48 Bags / Pallet 1,088.64 Kg
10.30005 Pail 5 Kg Grey 132 Pails / Pallet 660 Kg



PENEPLUG
PENEPLUG Image

SHORT DESCRIPTION & APPLICATIONS

Rapid setting, crystal growth cementitious waterplug, designed to stop active water leaks and moisture ingress. Supports all PENETRON® waterproofing systems. In the mixing, a small quantity of water is required, forming the material into a wedge and always wearing rubber gloves.

CONSUMPTION INFORMATION

Indicatively, the consumption for voids filling is 1,2-1,4 Kg / Lt.

CODIFICATION PACKAGING COLOR PACKAGING INFO PALLET
10.30004 Pail 4 Kg Grey 132 Pails / Pallet 528 Kg
10.00003 Bag 18 Kg Grey 48 Bags / Pallet 864 Kg
10.00011 Pail 25 Kg Grey 33 Pails / Pallet 825 Kg



PENETRON PLUS
PENETRON PLUS Image

SHORT DESCRIPTION & APPLICATIONS

Crystal growth, cementitious mortar with quartz aggregates for dry-shake applications on horizontal concrete surfaces, which offers at the same time surface hardening and permanent waterproofing.

CONSUMPTION INFORMATION

The PENETRON PLUS® consumption for the dryshake application on horizontal fresh concrete surfaces is 0.6-1.0 Kg/m2, depending on the requirements of the flooring hardening.

CODIFICATION PACKAGING COLOR PACKAGING INFO PALLET
10.00008 Bag 18 Kg Grey 48 Bags / Pallet 864 Kg



Liquid Sealers
PENESEAL PRO RTU
PENESEAL PRO RTU Image

SHORT DESCRIPTION & APPLICATIONS

Spray applied liquid sealer, which forms a sub-surface barrier, that protects concrete against positive water penetration (strength increase) and seals existing cracks. Protects above ground concrete structures, exposed to weather conditions. Ideal for concrete roofs, podium decks, bridge decks, terraces, runways and driveways.

CONSUMPTION INFORMATION

Ready to use material. In horizontal surfaces, the consumption is 1 Lt for 4-6 m2. Intense air and high temperatures increase consumption. Important: after curing, the material must be activated with 3 successive water floods per day (intense water floods).

CODIFICATION PACKAGING COLOR PACKAGING INFO PALLET
10.00017 Pail 19 Lt Transparent 33 Pails / Pallet 627 Lt / ~ 702 Kg



PENESEAL FH
PENESEAL FH Image

CONCENTRATE 1:1 + HARDENER ADDITIVE #3 (~0,24 Lt)

SHORT DESCRIPTION & APPLICATIONS

Spray applied, chemically reactive, water based liquid sealer that penetrates concrete and masonry building materials, protecting, preserving and strengthening them permanently. Very strong dust stabilizer. Important: the material is concentrated and diluted with 1:1 water.

CONSUMPTION INFORMATION

The mixture consumption in flooring applications is 1 Lt for 4-5 m2, depending on the substrate absorbedness. Proportionally, the 19 Lt pail, after dilution (~38 Lt), covers150-180 m2.

CODIFICATION PACKAGING COLOR PACKAGING INFO PALLET
10.00010 Pail 19 Lt Transparent 33 Pails / Pallet 627 Lt / ~ 790 Kg
10.00011 Pail 4 Kg Transparent 56 Pails / Pallet 224 Kg



Cementitious waterproofing & repairing systems
PENETRON SEALCOAT
PENETRON SEALCOAT Image

SHORT DESCRIPTION & APPLICATIONS

Waterproofing, cementitious coating mortar with polymers. Applied, depending on the project requirements as:
a) sealer of the concrete porous, after mixing each bag with only ~5.7-6.0 Kg water or for increased adhesion with the mixing of 4 Kg water and ~2 Kg of PENETRON® ACRYLIC BONDCRETETM adhesion enhancer.
b) flexible, two components system with the mixing of 2-3 Kg water and 4 Kg PENECRYLTM ELASTIC. Applicable on concrete surfaces, mortars, bricks or stones with medium mobility and capillary bridging requirements.
c) waterproofing, UV and external conditions resistant, elastic system with the mixing of only 12 Kg PENECRYLTM ELASTIC. Applied as above, but on surfaces with higher mobility requirements.

CONSUMPTION INFORMATION

Generally, the system’s consumption is 2,5-3,0 Kg/m2 in total for two coats without water calculation.
a) 1 bag of PENETRON® SEALCOATTM gives in total as porous sealer (only with water) ~9 m2, while, with adhesion increase, 1 bag of PENETRON®SEALCOATTM mixed with 4 Kg of water and ~2 Kg of PENETRON® ACRYLIC BONDCRETETM gives in total ~10 m2.
b) 1 bag of PENETRON® SEALCOATTM mixed with 2-3 Kg of water and 4 Kg of PENECRYLTM ELASTIC gives in total as a flexible system  ~10,5 m2.
c) 1 bag of PENETRON® SEALCOATTM mixed with only 12 Kg of PENECRYLTM ELASTIC gives in total as a flexible system ~14 m2.

CODIFICATION PACKAGING COLOR PACKAGING INFO PALLET
10.00006 Bag 22.68 Kg Grey 48 Bags / Pallet 1.088,64 Kg
10.00009 Bag 22.68 Kg White 48 Bags / Pallet 1.088,64 Kg



Water expanding systems
PENEBAR SW 45 RAPID TYPE A
PENEBAR SW 45 RAPID TYPE A Image

SHORT DESCRIPTION & APPLICATIONS

Rapid expansion, water expanding sealing strip. For its placement, use the bonding primer PENEBARTM PRIMER. Important: protect from water and rain, until concrete pouring.
Roll dimension: 19 mm x 25 mm x 5 m.

CONSUMPTION INFORMATION

Calculation in linear meters.

CODIFICATION PACKAGING COLOR PACKAGING INFO PALLET
10.10001 Roll 5 m Black 6 Rolls / Box = 30m 20 Boxes / ~420 Kg



PENEBAR SW 45 RAPID (HT) TYPE A
PENEBAR SW 45 RAPID (HT) TYPE A Image

SHORT DESCRIPTION & APPLICATIONSΣ

Rapid expansion, water expanding sealing strip, designed to withstand high temperature environments. For its placement, use the bonding primer PENEBAR PRIMER. Important: protect from water and rain, until concrete pouring. Roll dimension: 19 mm x 25 mm x 5 m.

CONSUMPTION INFORMATION

Calculation in linear meters.

CODIFICATION PACKAGING COLOR PACKAGING INFO PALLET
10.10005 Roll 5 m Black 6 Rolls / Box = 30m 36 Boxes / ~932 Kg



PENEBAR SW 45 RAPID TYPE B
PENEBAR SW 45 RAPID TYPE B Image

SHORT DESCRIPTION & APPLICATIONS

Rapid expansion, water expanding sealing strip. For its placement, use the bonding primer PENEBARTM PRIMER. Important: protect from water and rain, until concrete pouring.
Roll dimension: 9 mm x 25 mm x 5 m.

CONSUMPTION INFORMATION

Calculation in linear meters.

CODIFICATION PACKAGING COLOR PACKAGING INFO PALLET
10.10002 Roll 4 m Black 6 Rolls / Box = 24m 35 Boxes / ~335 Kg



PENEBAR SW 55 TYPE A
PENEBAR SW 55 TYPE A Image

SHORT DESCRIPTION & APPLICATIONS

Water expanding sealing strip of slow, controlled expansion. Suitable for application in humidity and rain conditions. For its placement, use the bonding primer PENEBARTM PRIMER or masonry nails in conditions of intense humidity. Roll dimension: 19 mm x 25 mm x 5 m.

CONSUMPTION INFORMATION

Calculation in linear meters.

CODIFICATION PACKAGING COLOR PACKAGING INFO PALLET
10.10003 Roll 5 m Black 6 Rolls / Box = 30m 20 Boxes / ~420 Kg



PENEBAR PRIMER
PENEBAR PRIMER Image

SHORT DESCRIPTION & APPLICATIONS Water expanding strip primer. Stabilizes the substrate and prevents the humidity penetration to the  PENEBARTMSW. Important: the material must be well set prior to PENEBARTM SW placement. In conditions of intense substrate humidity, use masonry nails.

CONSUMPTION INFORMATION

Indicatively: 1 Lt primer covers ~60 linear meters or correspondingly 0,75 Lt pail for 40 – 48 m and 3,80 Lt pail for 200 – 240 m.

CODIFICATION PACKAGING COLOR PACKAGING INFO PALLET
10.11005 Pail 0.75 Lt Orange 16 Pails / Box
10.11001 Pail 3.80 Lt Orange 4 Pails / Box



Repairing mortars
PENETRON ACRYLIC BONDCRETE
PENETRON ACRYLIC BONDCRETE Image

SHORT DESCRIPTION & APPLICATIONS Acrylic based emulsion for enhancing the adhesion of mortars and concrete, used as admixture (dilution 1:1-1:2 with water) or as primer (self same or 1:1 with water). Attention: as bonding primer the material must set well. Adhesion open time ~2 weeks. Used also as SEALCOATTM System improvement component.

CONSUMPTION INFORMATION

As adhesion material between old and new mortar or concrete, the 3.8 Lt pail covers 18-22 m2. Attention: good substrate preparation. As SEALCOATTMadhesion enhancing admixture, it corresponds ~2 Kg per bag (the 3,8 Lt pail is ~4 Kg).

CODIFICATION PACKAGING COLOR PACKAGING INFO PALLET
10.11002 Pail 3.8 Lt White 48 Bags / Pallet 100 Pails / ~ 400 Kg



PENETRON ACRYLIC PATCH
PENETRON ACRYLIC PATCH Image

SHORT DESCRIPTION & APPLICATIONS

One component, modified polymer, repairing mortar for applications requiring increased flexibility, good chemical resistance, finishing and relatively rapid strength increase. Ideal for repairs in concrete elements, stairs, parapets, pipes, balconies, ramps, floors etc. Mixing: 1 bag in 4.7-5.0 Lt water.

CONSUMPTION INFORMATION

1 bag fills ~12 Lt. The consumption for voids filling is ~1,9 Kg/Lt or 19 Kg/m2 per 1 cm of repairs thickness. For thicknesses above 5 cm add up to 5.5 Kg/bag QUARTZ SAND MIX 1.5-8.0 MM (filling ~14,5 Lt).

 

CODIFICATION PACKAGING COLOR PACKAGING INFO PALLET
10.20004 Bag 22.68 Kg Grey 48 Bags / Pallet 1,088.64 Kg



PENETRON V/O PATCH
PENETRON V/O PATCH Image

SHORT DESCRIPTION & APPLICATIONS

One component, polymer modified, non sag, cementitious patch with a migratory corrosion inhibitor. Fast setting, good finishing for small thicknesses up to 50 mm per coat. Ideal for concrete vertical and overhead repairs. Mixing: 1 bag in 2.8-3.8 Lt water or 1 pail of 4.75 Kg in 0.6-0.8 Lt water (work in small quantities due to the restricted application time ~15 min). For the application of PENETRON® V/O PATCH as adhesion coat and corrosion protection, more water is required in the mixing, in order to become a workable brushable slurry.

CONSUMPTION INFORMATION

Indicatively, 1 bag fills gaps around 12.8 Lt. For repairings, consumption for filling is ~ 1.8 Kg/ t or 18 Kg/m2 per 1 cm thickness. For application thicknesses of more than 5 cm, add ~ 7 Kg/bag quartz aggregates QUARTZ SAND MIX 1.5-8.0 MM, for filling volume ~ 16 Lt. The small container (4.75 Kg) covers a volume of about 2.70 Lt. As an adhesion layer and corrosion protection, coated, consumption is 1,5-2,0 Kg/m2.

CODIFICATION PACKAGING COLOR PACKAGING INFO PALLET
10.30001 Pail 4.75 kg Grey 132 Pails/pallet 627 Kg
10.20003 Bag 22.68 Kg Grey 48 Bags / Pallet 1,088.64 Kg



PENETRON GROUT INJECT
PENETRON GROUT INJECT Image

SHORT DESCRIPTION & APPLICATIONS

Cement based grout, with high pumpability, grout sealer for concrete repairs (with grouting machine or casting), anchorages or fillings in masonry and other similar restorations. The very small particle size components in the product, allow the penetration of capillaries and cracks up to 0.4 mm, sealing and enhancing the strength of the repaired area.

CONSUMPTION INFORMATION

Indicative coverage of PENETRON® GROUT INJECT is approx. 18 – 20 Lt per 25 kg bag.

CODIFICATION PACKAGING COLOR PACKAGING INFO PALLET
12.01001 Bag 25 Kg Grey 60 Bags / Pallet 1,500 Kg



PENETRON GROUT FLOOR
PENETRON GROUT FLOOR Image

SHORT DESCRIPTION & APPLICATIONS

One component, cement based, pourable leveling mortar, high strength, for filling floors with mechanical stress. Compatible with the respective adhesion primers, depending on the absorbency of the substrate.

CONSUMPTION INFORMATION

Indicatively, consumption varies between 1.9 – 2.0 Kg/m2/mm thickness. Applied in thicknesses between 6 mm to 30 mm, without adding aggregates.

CODIFICATION PACKAGING COLOR PACKAGING INFO PALLET
12.021-342 Bag 25 Kg Grey 60 Bags / Pallet 1,500 Kg



Decorative cementitious
PENETRON ACRYLIC BONDCRETE
PENETRON ACRYLIC BONDCRETE Image

SHORT DESCRIPTION & APPLICATIONS Acrylic based emulsion for enhancing the adhesion of mortars and concrete, used as admixture (dilution 1:1-1:2 with water) or as primer (self same or 1:1 with water). Attention: as bonding primer the material must set well. Adhesion open time ~2 weeks. Used also as SEALCOATTM System improvement component.

CONSUMPTION INFORMATION

As adhesion material between old and new mortar or concrete, the 3.8 Lt pail covers 18-22 m2. Attention: good substrate preparation. As SEALCOATTMadhesion enhancing admixture, it corresponds ~2 Kg per bag (the 3,8 Lt pail is ~4 Kg).

CODIFICATION PACKAGING COLOR PACKAGING INFO PALLET
10.11002 Pail 3.8 Lt White 4 Pails / Box 100 Pails / ~ 400 Kg



INDUSTRIAL TOPPING SL
INDUSTRIAL TOPPING SL Image

SHORT DESCRIPTION & APPLICATIONS One component, high strength, self leveling mortar with polymers for internal or external use, even as final surface or flooring repairing. Ideal application for thicknesses up to 50 mm or, otherwise, with the addition of QUARTZ SAND MIX (~7 Kg / Bag) Mixing: 1 bag in 4.25 Lt water.

CONSUMPTION INFORMATION

Indicatively, the consumption (without quartz sand addition) is: ~1.8 Kg/m2 per 1 mm thickness. With the quartz sand addition the product consumption decreases up to 30%.

CODIFICATION PACKAGING COLOR PACKAGING INFO PALLET
10.12001 Bag 22.68 Kg Grey 48 Bags / Pallet 1,088.64 Kg



Cementitious waterproofing
PENETRON Image
PENETRON
SHORT DESCRIPTION & APPLICATIONS Cementitious, concrete surface applied (slurry application) or for filling cavities (pourable application), crystal growth waterproofing mortar. Indicative mixing: For surface... Read More
PENETRON INJECT (Α+Β) Image
PENETRON INJECT (Α+Β)
SHORT DESCRIPTION & APPLICATIONS New technology, two component integral crystalline waterproofing crack-injection-system. Application by cement-injection-pump. Suitable for permanent waterproofing and repairi... Read More
PENETRON ADMIX Image
PENETRON ADMIX
SHORT DESCRIPTION & APPLICATIONS Crystal growth, cementitious powder, waterproofing system added to concrete as an admixture. The product can be used in the... Read More
PENETRON ADMIX SOLUBLE BAGS Image
PENETRON ADMIX SOLUBLE BAGS
SHORT DESCRIPTION & APPLICATIONS Crystal growth, cementitious powder, waterproofing system added to concrete as an admixture. Same technology as the above ex... Read More
PENECRETE MORTAR Image
PENECRETE MORTAR
SHORT DESCRIPTION & APPLICATIONS Crystal growth, cementitious waterproofing and repairing mortar. Supports all PENETRON® waterproofing systems. ... Read More
PENEPLUG Image
PENEPLUG
SHORT DESCRIPTION & APPLICATIONS Rapid setting, crystal growth cementitious waterplug, designed to stop active water leaks and moisture ingress. Supports all... Read More
PENETRON PLUS Image
PENETRON PLUS
SHORT DESCRIPTION & APPLICATIONS Crystal growth, cementitious mortar with quartz aggregates for dry-shake applications on horizontal concrete surfaces, which... Read More
Liquid Sealers
PENESEAL PRO RTU Image
PENESEAL PRO RTU
SHORT DESCRIPTION & APPLICATIONS Spray applied liquid sealer, which forms a sub-surface barrier, that protects concrete against positive water penetration (s... Read More
PENESEAL FH Image
PENESEAL FH
CONCENTRATE 1:1 + HARDENER ADDITIVE #3 (~0,24 Lt) SHORT DESCRIPTION & APPLICATIONS Spray applied, chemically reactive, water... Read More
Cementitious waterproofing & repairing systems
PENETRON SEALCOAT Image
PENETRON SEALCOAT
SHORT DESCRIPTION & APPLICATIONS Waterproofing, cementitious coating mortar with polymers. Applied, depending on the project requirements as: a) sealer of the concrete porous, a... Read More
Water expanding systems
PENEBAR SW 45 RAPID TYPE A Image
PENEBAR SW 45 RAPID TYPE A
SHORT DESCRIPTION & APPLICATIONS Rapid expansion, water expanding sealing strip. For its placement, use the bonding primer PENEBARTM PRIMER. Imp... Read More
PENEBAR SW 45 RAPID (HT) TYPE A Image
PENEBAR SW 45 RAPID (HT) TYPE A
SHORT DESCRIPTION & APPLICATIONSΣ Rapid expansion, water expanding sealing strip, designed to withstand high temperature environments. For its placement, us... Read More
PENEBAR SW 45 RAPID TYPE B Image
PENEBAR SW 45 RAPID TYPE B
SHORT DESCRIPTION & APPLICATIONS Rapid expansion, water expanding sealing strip. For its placement, use the bonding primer PENEBARTM PRIMER. Imp... Read More
PENEBAR SW 55 TYPE A Image
PENEBAR SW 55 TYPE A
SHORT DESCRIPTION & APPLICATIONS Water expanding sealing strip of slow, controlled expansion. Suitable for application in humidity and rain conditions. For ... Read More
PENEBAR PRIMER Image
PENEBAR PRIMER
SHORT DESCRIPTION & APPLICATIONS Water expanding strip primer. Stabilizes the substrate and prevents the humidity penetration to the  PENEBARTMSW. Important: the material must ... Read More
Repairing mortars
PENETRON ACRYLIC BONDCRETE Image
PENETRON ACRYLIC BONDCRETE
SHORT DESCRIPTION & APPLICATIONS Acrylic based emulsion for enhancing the adhesion of mortars and concrete, used as admixture (dilution 1:1-1:2 with water) or as primer (self same or 1:1 wi... Read More
PENETRON ACRYLIC PATCH Image
PENETRON ACRYLIC PATCH
SHORT DESCRIPTION & APPLICATIONS One component, modified polymer, repairing mortar for applications requiring increased flexibility, good chemical resistance... Read More
PENETRON V/O PATCH Image
PENETRON V/O PATCH
SHORT DESCRIPTION & APPLICATIONS One component, polymer modified, non sag, cementitious patch with a migratory corrosion inhibitor. Fast setting, good finishing for small thicknesses ... Read More
PENETRON GROUT INJECT Image
PENETRON GROUT INJECT
SHORT DESCRIPTION & APPLICATIONS Cement based grout, with high pumpability, grout sealer for concrete repairs (with grouting machine or casting), anchorages or fillings in masonry and other similar resto... Read More
PENETRON GROUT FLOOR Image
PENETRON GROUT FLOOR
SHORT DESCRIPTION & APPLICATIONS One component, cement based, pourable leveling mortar, high strength, for filling floors with mechanical stress. Compatible with the respective ... Read More
Decorative cementitious
PENETRON ACRYLIC BONDCRETE Image
PENETRON ACRYLIC BONDCRETE
SHORT DESCRIPTION & APPLICATIONS Acrylic based emulsion for enhancing the adhesion of mortars and concrete, used as admixture (dilution 1:1-1:2 with water) or as primer (self same or 1:1 wi... Read More
INDUSTRIAL TOPPING SL Image
INDUSTRIAL TOPPING SL
SHORT DESCRIPTION & APPLICATIONS One component, high strength, self leveling mortar with polymers for internal or external use, even as final surface or flooring repairing. Ideal applicatio... Read More